Simple Mesh Generation


Introduction

This simple tutorial is for generating a STL mesh using Incendia NEXT volumetric mode.


Step 1


Incendia Next Tutorial 2-1

1. Select the Editors Tab.



Step 2


Incendia Next Tutorial 2-2

2. In the Editor tab, mark the Edit button.



Step 3


Incendia Next Tutorial 2-3

3. In the Baseshape Menu, select the New button.



Step 4


Incendia Next Tutorial 4-1

4. Select the Mobius Strip baseshape.



Step 5


Incendia Next Tutorial 4-2

5. Set the Interior Type control to Filled, in order to fill the baseshape interior voxels.
6. Increase the iteration Depth to 4, also change the baseshape Radius.
7. Enable the Show Baseshape option in order to show the uniterated baseshape.



Step 6


Incendia Next Tutorial 4-3

8. Go to the Volume Tab.



Step 7


Incendia Next Tutorial 4-4

9. Choose a Volumetric resolution and press the Start Volumetric Render button.



Step 8


Incendia Next Tutorial 4-5

10. When the Volumetric render process starts, the render wheel will begin to turn.
11. After a time (depending of the fractal complexity), press the Export Volume as STL Mesh button in order to start the mesh generation process.



Step 9


Incendia Next Tutorial 4-6

12. Incendia will perform several analyses to the rendered volume and will begin to generate the resulting mesh.
13. Now you can end the volumetric mode by pressing the Close the Volumetric Mode.



Result


Generated Mesh

This is the generated mesh, previeved in MeshLab.